Are you looking to expand your rig setup, only to realize that a single PSU isn't enough to handle the load? Fortunately, we've got the solution for you - adding a second server PSU! In this guide, we'll walk you through the process of setting up a second server PSU and the essential steps to link it up with your existing system.
Before we start, it's important to note that this guide assumes you have basic knowledge of electronics and computing equipment. If you're unsure about any of the steps, we recommend contacting a professional for assistance.
Step 1: Determine your Server PSU Adapter needs
The first step is to identify your needs for a PSU. Determine the wattage required for your system and make sure the second PSU adapter you buy is compatible with your existing one. This will ensure you have a smooth and error-free installation process.
Step 2: Set up the Second Server PSU
Once you have your new PSU, carefully take it out of the box and place it next to your existing PSU. Next, connect the 24-pin ATX connector from the new PSU into the motherboard. This will power the system on with the new PSU.
Step 3: Connect the Secondary PSU
Once the system is running, it's time to connect the Secondary PSU. Start by connecting it to the AC power source, then connect the 24-pin ATX connector from the new PSU into the motherboard. Again, be sure to check the compatibility of your new PSU adapter before connecting it. If it's not compatible, the system may fail to boot up.
Step 4: Connect the Two PSUs
Now that both PSUs are connected, it's time to link them together. To do this, you can use a PSU adapter. Connect the 24-pin main connector from the primary PSU to the adapter, then connect the adapter to the secondary PSU. This process will link the two PSU together, and they will work in tandem to power the system.
Step 5: Test the System
After all the connections are made, it's time to test your system. Turn on your rig and monitor the voltages using software tools that come with your motherboard, check the PSU's output to ensure that it's working correctly. If everything is in order, your system is ready to go!
Conclusion
Setting up a second server PSU adapter can be intimidating, but as we have seen, it is not difficult with the right tools and knowledge. Careful selection of the correct PSU adapter, coupled with the correct wiring of the system, is key to a successful installation. And with these easy to follow steps, you can now add more power to your rig without any glitches!